An always-on display keeps a dimmed version of your watch face visible all the time, so you can read the time without raising your wrist or tapping. On AMOLED smartwatches it typically cuts battery life noticeably, often by a third or more compared with a screen that turns off. On transflective MIP screens, used by many Garmin and some Amazfit models, the display is always visible by design and uses very little power.

How Always-on Works

When you lower your wrist, the watch switches to a low-power mode: fewer bright pixels, a slower refresh rate and a simplified watch face. AMOLED screens only light the pixels they use, so dark faces with small numbers save power. MIP screens reflect ambient light, so they are readable in sunlight and stay on without much drain.

Battery Impact by Screen Type

Screen Type Always-on Battery Impact Readability
AMOLED Noticeable, depends on the watch face Vivid colors, bright indoors
MIP (transflective) Very low Excellent in sunlight, less vivid
LTPO AMOLED Lower than standard AMOLED thanks to slow refresh Vivid, efficient

For a deeper look at screens, see how to choose a smartwatch.

Wrist Raise vs Always-on

The alternative to always-on is raise to wake, which lights the screen when you lift your wrist. It is efficient but can miss quick glances, especially while cycling or carrying things, and it sometimes wakes the screen during unrelated movements. Some owners prefer a tap-to-wake setting instead. Trying each for a day or two is the easiest way to see which fits your routine and battery needs.

Is Always-on Worth It?

  • Yes if you check the time often, glance at workouts mid-run or dislike raising your wrist in meetings.
  • Maybe not if you need multi-day battery on an AMOLED watch or charge only every few days.
  • Not an issue on MIP watches, where it is part of the design.

Settings That Reduce the Drain

  1. Choose a dark watch face with few complications.
  2. Lower brightness or let auto-brightness handle it.
  3. Turn on bedtime or sleep mode so the screen is off overnight.
  4. Use theater or do-not-disturb modes when you do not need it.
  5. Keep always-on only during workouts if your watch allows that.

More tweaks are in 10 smartwatch settings that improve battery life and face tips in how to customize watch faces.

Always-on During Workouts

Workouts are where always-on helps most. Glancing at pace or heart rate without lifting your wrist is easier on runs and rides, and many watches keep the screen fully bright during an active workout regardless of the daily setting. If your watch lets you choose, keep always-on off during the day and on during workouts to balance convenience and battery. Pair that with an efficient GPS mode on long sessions; dual-band GPS explained covers the trade-offs.

Does It Wear Out the Screen?

Modern AMOLED watches shift pixels slightly and dim static elements to reduce burn-in risk. Normal use with always-on is unlikely to cause visible burn-in, though a very static, bright face over years carries more risk than a varied, dark one.

Final Thoughts

Always-on is a convenience you pay for in battery on AMOLED watches and get almost free on MIP screens. A dark watch face, sleep mode and smart brightness keep it practical.

FAQs

How much battery does always-on use?

On AMOLED watches, often a third or more of daily battery. It varies by watch face and brightness.

Can always-on cause screen burn-in?

The risk is low on modern watches. Dark, varied faces reduce it further.

Do Garmin watches have always-on displays?

MIP models are always visible by design. AMOLED models offer it as a setting.